Luggage Compartment Door Opener Main Switch: Inspection: Inspection

INSPECT LUGGAGE DOOR OPENING SWITCH ASSEMBLY (LUGGAGE DOOR OPENING CANCEL SWITCH ASSEMBLY)

Check the resistance.

Fig 1: Measuring Resistance Of Luggage Door Opening Switch Assembly (Luggage Door Opening Cancel Switch Assembly) Connector

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Measure the resistance according to the value(s) in the table below.

Standard Resistance

Tester Connection	Condition	Specified Condition
2 (B) - 1 (L)	Switch off (Not pressed)	10 kΩ or higher
2 (B) - 1 (L)	Switch on (Pressed)	Below 1 Ω

If the result is not as specified, replace the luggage door opening switch assembly (luggage door opening cancel switch assembly).

TEXT IN ILLUSTRATION

*a	Component without harness connected (Luggage Door Opening Switch Assembly - Luggage Door Opening Cancel Switch Assembly)