LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2013 >> Avalon XLE >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio / Video System (Diagnostic Codes & Symptom Tests) (Except Hybrid) >> Audio And Visual System >> Symptom Tests >> Does not Play even after Bluetooth Audio Mode is Selected >> Procedure

Does not Play even after Bluetooth Audio Mode is Selected: Procedure

  1. CHECK OPERATION 
    1. Check if the portable player operates normally.

      OK

      The portable player operates normally.

    NG → MALFUNCTION IN PORTABLE PLAYER 

    OK: Go to next step 

  2. CHECK AUDIO SETTINGS 
    1. Display the "Sound Settings" screen.
      Fig 1: Identifying Sound Settings Screen Display
      GTY317090Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Set volume, fader and balance to the initial values and check that the sound is normal.

      OK

      Audio system returns to normal.

      HINT: 

      Sound quality adjustment measures vary according to the type of amplifier.

      TEXT IN ILLUSTRATION

      *a Example

    NG → See step   5 

    OK: Go to next step 

  3. CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL 
    1. Check if the "Bluetooth" audio player plays normally on another "Bluetooth" audio compatible vehicle of the same model.

      OK

      "Bluetooth" audio player plays normally.

    NG → MALFUNCTION IN PORTABLE PLAYER 

    OK → See step   4 

  4. PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE 
  5. REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY. Refer to  REMOVAL