DTC U0073: Sending Malfunction (Navigation to APGS); DTC U0100: Lost Communication with ECM; DTC U0129: VSC(ECB)ECU Communication; DTC U0140: Lost Communication with Body Control Module; DTC U0155: Meter ECU Communication: Procedure
- CHECK DTC
- Clear the DTCs. Refer to DTC CHECK / CLEAR .
- Recheck for DTCs and check that no DTCs are output.
OK
No DTCs are output.
NG → See step 3
OK → See step 2
- USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING
- GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING