Meter / Gauge System: Initialization: Initialization
- MAINTENANCE REQUIRED REMINDER RESET PROCEDURE (for Speedometer with Imperial Units)
- Turn the engine switch on (IG).
- Press the ODO/TRIP switch (light control rheostat switch) at the combination meter assembly until the TRIP A meter appears.
- Turn the engine switch off.
- Turn the engine switch on (IG) while pressing and holding the ODO/TRIP switch (light control rheostat switch). Hold the ODO/TRIP switch (light control rheostat switch) until the following condition is met and 5 seconds have elapsed.
- The multi-information display shows that the reset is complete.