LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2013 >> Avalon XLE >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System (Exterior) (Service Information) (Except Hybrid) >> High Mounted Stop Light Assembly >> Inspection >> Inspection

High Mounted Stop Light Assembly: Inspection: Inspection

  1. INSPECT CENTER STOP LIGHT ASSEMBLY 
    1. Connect a positive (+) lead from the battery to terminal 1 and a negative (-) lead to terminal 2.
      Fig 1: Inspecting Center Stop Light Assembly
      GTY314739Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check that the center stop light comes on.

      OK

      The light comes on.

      TEXT IN ILLUSTRATION

      *a Component without harness connected
      (Center Stop Light Assembly)

      If the result is not as specified, replace the center stop light assembly.