Front Seat Inner Belt Assembly: Installation: Installation

WARNING:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

INSTALL FRONT SEAT INNER BELT ASSEMBLY

Fig 1: Identifying Front Seat Inner Belt Assembly & Fasteners
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Install the front seat inner belt with the nut.
  TEXT IN ILLUSTRATION
  
  *a Convex
  
  Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)
  
  NOTE:
  The anchor part of the seat belt must not overlap the convex.
2. Engage the clamps and connect the connectors.
INSTALL FRONT SEAT CUSHION INNER SHIELD RH (for Manual Seat) . Refer to REASSEMBLY - Step 30
INSTALL FRONT SEAT CUSHION INNER SHIELD RH (for Power Seat) . Refer to REASSEMBLY - Step 30
INSTALL NO. 1 FRONT SEAT INNER CUSHION SHIELD (for Power Seat) . Refer to REASSEMBLY - Step 31
INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)
1. Install the front seat assembly. Refer to INSTALLATION .
INSTALL FRONT SEAT ASSEMBLY (for Power Seat)
1. Install the front seat assembly. Refer to INSTALLATION .
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)

NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .