LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Sienna SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Automatic Transmission System (U760E) (Service Information)) >> Valve Body Assembly >> Reassembly >> Reassembly

Valve Body Assembly: Reassembly: Reassembly

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL SHIFT SOLENOID VALVE SL4 
    1. Coat the shift solenoid valve SL4 with ATF.
      Fig 1: Identifying Shift Solenoid Valve SL4 And Lock Plate
      GTY296895Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the shift solenoid valve SL4 onto the transmission valve body with the bolt and lock plate.
      TEXT IN ILLUSTRATION

      *1 Lock Plate
      *2 Solenoid Valve SL4

      Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf) 

  2. INSTALL SHIFT SOLENOID VALVE SL3 
    1. Coat the shift solenoid valve SL3 with ATF.
      Fig 2: Identifying Shift Solenoid Valve SL3 And Lock Plate
      GTY299574Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the shift solenoid valve SL3 onto the transmission valve body with the bolt and lock plate.
      TEXT IN ILLUSTRATION

      *1 Lock Plate
      *2 Solenoid Valve SL3

      Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf) 

  3. INSTALL SHIFT SOLENOID VALVE SLU 
    1. Coat the shift solenoid valve SLU with ATF.
      Fig 3: Identifying Shift Solenoid Valves SLU And Lock Plate
      GTY307672Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the shift solenoid valve SLU onto the transmission valve body.
      TEXT IN ILLUSTRATION

      *1 Lock Plate
      *2 Solenoid Valve SLT
      *3 Solenoid Valve SLU
  4. INSTALL SHIFT SOLENOID VALVE SLT 
    1. Coat the shift solenoid valve SLT with ATF.
    2. Install the shift solenoid valve SLT onto the transmission valve body with the bolt and lock plate.

      Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf) 

  5. INSTALL SHIFT SOLENOID VALVE SL1 
    1. Coat the shift solenoid valve SL1 with ATF.
      Fig 4: Identifying Shift Solenoid Valves SL1 And Lock Plate
      GTY300813Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the shift solenoid valve SL1 onto the transmission valve body.
      TEXT IN ILLUSTRATION

      *1 Lock Plate
      *2 Clamp
      *3 Solenoid Valve SL2
      *4 Solenoid Valve SL1
  6. INSTALL SHIFT SOLENOID VALVE SL2 
    1. Coat the shift solenoid valve SL2 with ATF.
    2. Install the shift solenoid valve SL2 onto the transmission valve body with the 2 bolts, clamp and lock plate.

      Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf) 

  7. INSTALL SHIFT SOLENOID VALVE SL 
    1. Coat the shift solenoid valve SL with ATF.
      Fig 5: Identifying Shift Solenoid Valve SL
      GTY298340Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *1 Solenoid Valve SL
    2. Install the shift solenoid valve SL onto the transmission valve body with the bolt.

      Torque: 11 N*m (110 kgf*cm, 8 ft.*lbf) 

  8. INSTALL TRANSMISSION WIRE  See step  1
  9. INSTALL TRANSMISSION REVOLUTION SENSOR  See step  1
scientia non olet · About LEMON Manuals