Front Bumper: Removal: Removal

REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

Fig 1: Identifying Front Wheel Opening Extension Pad LH & Fasteners
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Remove the 4 screws and front wheel opening extension pad.
REMOVE FRONT WHEEL OPENING EXTENSION PAD RH
HINT:

Use the same procedure as for the LH side.
REMOVE RADIATOR GRILLE SUB-ASSEMBLY

Fig 2: Identifying Radiator Grille Sub-Assembly & Fasteners
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Remove the 6 clips.
2. Disengage the 8 guides and remove the radiator grille.
REMOVE FRONT BUMPER COVER

Fig 3: Identifying Front Bumper Cover Protective Tape
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Apply protective tape, as shown in the illustration.
  TEXT IN ILLUSTRATION
  
  *1 Protective Tape
2. Using a screwdriver, remove the pin hold clip.
  
  Fig 4: Removing Front Bumper Pin Hold Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT:
  
  Use the same procedure for the remaining parts.
3. Remove the screw.
  HINT:
  
  Use the same procedure for the remaining parts.
4. Remove the 3 clips.
  
  Fig 5: Identifying Upper Front Bumper Cover Fasteners
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Remove the 6 screws.
  
  Fig 6: Identifying Lower Front Bumper Cover Fasteners
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Disengage the 10 claws and remove the front bumper cover.
  
  Fig 7: Identifying Front Bumper Cover & Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. Disconnect the connectors.
  HINT:
  
  If the vehicle is equipped with fog lights, disconnect the connector.