LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Sienna SE >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Service Information) >> Power Back Door Warning Buzzer >> Removal >> Removal

Power Back Door Warning Buzzer: Removal: Removal

  1. REMOVE BACK DOOR TRIM BOARD ASSEMBLY  See step  2
  2. REMOVE POWER BACK DOOR WARNING BUZZER 
    1. Disconnect the connector.
      Fig 1: Identifying Power Back Door Warning Buzzer, Connector & Clamp
      GTY302413Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the clamp and remove the power back door warning buzzer.
scientia non olet · About LEMON Manuals