Rear Power Window Switch: Removal: Removal

HINT: 

• Use the same procedure for the RH side and LH side.
• The procedure listed below is for the RH side.

1. REMOVE REAR DOOR ARMREST BASE UPPER PANEL  . Refer to DISASSEMBLY - Step 2
2. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY 
   1. Disengage the 2 claws and remove the rear power window regulator switch.
      Fig 1: Identifying Rear Power Window Regulator Switch Assembly Claws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002