DTC 23: Swivel Pulse Abnormal: Description
When the No. 2 power seat switch assembly (ingress and egress switch) has been operated, the position control ECU assembly outputs driving voltage to drive the power seat motor assembly (swivel motor). When the power seat motor assembly (swivel motor) is driven, its pulse sensor sends the seat position information via pulse signal to the position control ECU assembly. Based on this signal, the position control ECU assembly stores the seat swivel position.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| 23 | When the power seat motor assembly (swivel motor) is activated, 0.3 seconds pass without any edges in the pulse signal, and this occurs 7 times |
|