DTC 22: Front-rear Slide Pulse Abnormal: Description
When the power seat switch assembly (front-rear slide switch) or No. 2 power seat switch assembly (front-rear slide switch) have been operated, the position control ECU assembly outputs driving voltage to drive the power seat motor assembly (front-rear slide motor). When the power seat motor assembly (front-rear slide motor) is driven, its pulse sensor sends the seat position information via pulse signal to the position control ECU assembly. Based on this signal, the position control ECU assembly stores the seat front-rear slide position.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| 22 | When the power seat motor assembly (front-rear slide motor) is activated, 0.3 seconds pass without any edges in the pulse signal, and this occurs 7 times |
|