ROOM LIGHT (w/o Rear Sliding Roof): Removal: Removal

REMOVE ROOF HEADLINING ASSEMBLY (for Rear No. 1 Seat)
Refer to REMOVAL
REMOVE NO. 2 ROOM LIGHT LENS (for Rear No. 1 Seat)

Fig 1: Disengaging No. 2 Room Light Lens Fasteners With Moulding Remover (For Rear No. 1 Seat)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Using a moulding remover, disengage the 2 claws, hook and remove the room light lens.
  TEXT IN ILLUSTRATION
  
  *1 Moulding Remover
REMOVE ROOM LIGHT RETAINER RH (for Rear No. 1 Seat)

Fig 2: Removing Room Light Connector Retainer RH (For Rear No. 1 Seat)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Remove the room light retainer by sliding it in the direction indicated by the arrow mark in the illustration.
REMOVE NO. 2 ROOM LIGHT BULB (for Rear No. 1 Seat)

Fig 3: Identifying No. 2 Room Light Bulb Bezel Hook (For Rear No. 1 Seat)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Disconnect the connector.
2. Disengage the hook and remove the bezel.
3. Remove the room light bulb.
REMOVE NO. 2 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for Rear No. 1 Seat)
1. Using a moulding remover, disengage the 2 claws, hook and remove the room light lens.
  
  Fig 4: Removing No. 2 Interior Illumination Light Assembly Fasteners Using Moulding Remover (For Rear No. 1 Seat)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  TEXT IN ILLUSTRATION
  
  *1 Moulding Remover
2. Remove the room light retainer by sliding it in the direction indicated by the arrow mark in the illustration.
  
  Fig 5: Removing No. 2 Interior Illumination Light Assembly Room Light Connector Retainer (For Rear No. 1 Seat)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disconnect the connector.
  
  Fig 6: Identifying No. 2 Interior Illumination Light Assembly Bezel Hook (For Rear No. 1 Seat)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Disengage the hook and remove the bezel.
REMOVE NO. 2 ROOM LIGHT LENS (for Rear No. 2 Seat)

Fig 7: Removing No. 2 Room Light Lens Fasteners Using Moulding Remover (For Rear No. 2 Seat)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Using a moulding remover, disengage the 2 claws, hook and remove the room light lens.
  TEXT IN ILLUSTRATION
  
  *1 Moulding Remover
REMOVE NO. 2 ROOM LIGHT BULB (for Rear No. 2 Seat)

Fig 8: Identifying No. 2 Room Light Bulb Bezel Hook (For Rear No. 2 Seat)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Disengage the hook.
2. Disconnect the connector and remove the bezel.
3. Remove the room light bulb.
REMOVE NO. 2 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for Rear No. 2 Seat)
1. Using a moulding remover, disengage the 2 claws, hook and remove the room light lens.
  
  Fig 9: Removing No. 2 Interior Illumination Light Assembly Fasteners Using Moulding Remover (For Rear No. 2 Seat)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  TEXT IN ILLUSTRATION
  
  *1 Moulding Remover
2. Disengage the hook.
  
  Fig 10: Identifying Room Light Lens Bezel Hook (For Rear No. 2 Seat)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disconnect the connector and remove the bezel.