LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Sienna SE >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Safety Connect System (Diagnostic Codes & Symptom Tests) >> Safety Connect System >> DTC B15A8: Telematics Transceiver Malfunction >> Procedure

DTC B15A8: Telematics Transceiver Malfunction: Procedure

  1. REPLACE DCM (TELEMATICS TRANSCEIVER) 
    1. Replace the DCM (Telematics Transceiver). Refer to REMOVAL .
      NOTE:
      • The ignition switch must be off.
      • Do not swap the DCM (Telematics Transceiver) with one from another vehicle.

    NEXT → See step   2 

  2. PERFORM DCM ACTIVATION. Refer to  DCM ACTIVATION