Vehicle Position Mark is not Updated: Procedure

1. Check that the map disc is not deformed or cracked.
   Fig 1: Identifying Cracked Or Deformed Map Discs

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK

   No deformations or cracks on map disc.

NG → REPLACE MAP DISC 

OK: Go to next step 

1. Check if a touch scroll can be performed on the map display.

   OK

   Touch scroll can be performed.

NG → See step   4 

OK: Go to next step 

1. Enter the "Navigation Check" mode and select "Vehicle Sensors". Refer to OPERATION CHECK .
   Fig 2: Screen Display - Navigation Check Mode

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check if these readings are equal or almost equal.

   OK

   The readings are equal or almost equal.

NG → See step   5 

OK → END