Black Screen: Procedure
- CHECK DISPLAY SETTING
- Check that the display is not in "Screen Off" mode.
OK
The display setting is not in "Screen Off" mode.
NG → SET SCREEN TO "SCREEN ON" MODE
OK: Go to next step
- Check that the display is not in "Screen Off" mode.
- CHECK IMAGE QUALITY SETTING
- Check that the screen color quality can be set.
OK
Setting is possible.
NG → See step 3
OK → PRESS PANEL SWITCH "DISPLAY" AND SET SCREEN COLOR QUALITY TO NORMAL
- Check that the screen color quality can be set.
- CHECK CABIN
- Check that condensation is not likely to occur in the cabin, and that the temperature is not high or extremely low in the cabin.
HINT:
- A humid cabin and a rapid change in temperature may lead to condensation. Condensation in the cabin may cause a short circuit.
- The appropriate cabin temperature is 20 to 30°C (68 to 86°F).
OK
Condensation is not likely and the temperature is not high or extremely low.
NG → HEAT OR COOL CABIN TO APPROPRIATE TEMPERATURE AND/OR DRY CABIN
OK → See step 4
- Check that condensation is not likely to occur in the cabin, and that the temperature is not high or extremely low in the cabin.
- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to PROBLEM SYMPTOMS TABLE