CD Sound Skips: Procedure

1. Check that the CD is not deformed or cracked.
   Fig 1: Identifying Deformed Or Cracked Disc

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK

   No deformation or cracks in the CD.

NG → CD IS FAULTY 

OK: Go to next step 

1. Check the CD
   Fig 2: Cleaning Disc With Soft Cloth

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK

   The CD is clean.

   HINT: 

   If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

   NOTE:

   Do not use a conventional record cleaner or anti-static preservative.

NG → CLEAN CD 

OK: Go to next step 

1. Check using another CD.
   1. Check if the problem recurs using another CD.

      OK

      The problem does not occur.

NG → See step   4 

OK → CD IS FAULTY 

1. Check the navigation receiver assembly installation condition.
   1. Check that the navigation receiver assembly is properly installed.

      OK

      The navigation receiver assembly is properly installed.

NG → See step   6 

OK → See step   5