DTC B1582: Map Disk Reading Malfunction: Procedure
- CHECK MAP DISC
- Check that the map disc is not deformed or cracked.
OK
No deformations or cracks on the map disc.
NG → See step 4
OK: Go to next step
- Check that the map disc is not deformed or cracked.
- DISC CLEANING
- Disc cleaning
- If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.NOTE:
Do not use a conventional record cleaner or anti-static preservative.
- If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
NEXT: Go to next step
- Disc cleaning
- CHECK FOR DTC
- Clear the DTC. Refer to DTC CHECK / CLEAR .
- Check for DTCs and check if the same trouble occurs again.
OK
No DTC is output.
NG → See step 4
OK → END (CD WAS DIRTY)
- REPLACE MAP DISC
- Replace the map disc.
- Clear the DTC. Refer to DTC CHECK / CLEAR .
- Recheck for DTCs and check if the same trouble occurs again.
OK
No DTC is output.
NG → See step 5
OK → END (MAP DISC IS FAULTY)
- REPLACE NAVIGATION RECEIVER ASSEMBLY. Refer to REMOVAL