DTC U0129: Lost Communication with Skid Control ECU: Description
The combination meter assembly receives signal from brake actuator (skid control ECU) through the CAN communication system.
| DTC Code |
DTC Detection Conditions |
Trouble Areas |
| U0129 |
When either of following conditions detected:
- 15 seconds have elapsed since engine started and IG voltage 10.5 V or more
- No communication with brake actuator (skid control ECU) continues for 3 seconds or more (No communication with ECM and skid control ECU continues for 60 seconds or more)
|
- Brake actuator (Skid control ECU)
- CAN communication system
|