LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Prius V >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Testing and Diagnosis >> Hybrid Control System [Diagnostic Codes (P0AA4-232 - U0424-537) & Circuit Tests] >> Hybrid Control System >> DTC P3004-133: Power Cable Malfunction >> Procedure

DTC P3004-133: Power Cable Malfunction: Procedure

  1. CHECK DTC OUTPUT (HYBRID CONTROL) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
    4. Check if DTCs are output.

      Result

      Result Proceed to
      P3004-133 only is output. A
      DTCs other than P3004-133 is output. B
    5. Turn the power switch off.

    B → See step   2 

    A → See step   3 

  2. GO TO DTC CHART (HYBRID CONTROL SYSTEM). Refer to  DIAGNOSTIC TROUBLE CODE CHART 
  3. REPLACE POWER MANAGEMENT CONTROL ECU. Refer to  COMPONENTS 
scientia non olet · About LEMON Manuals