DTC P0A0F-204: Engine Failed to Start; DTC P0A0F-205: Engine Failed to Start; DTC P0A0F-206: Engine Failed to Start; DTC P0A0F-524: Engine Failed to Start; DTC P0A0F-525: Engine Failed to Start: Description
If an engine malfunction occurs, an engine malfunction signal is sent from the ECM to the power management control ECU (HV CPU). When the power management control ECU (HV CPU) receives this signal, it sets a DTC and performs fail-safe control.
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P0A0F | 204 | Signal indicating abnormality input from the ECM (abnormal engine output) |
|
| 205 | Signal indicating abnormality input from the ECM (engine is unable to start) | ||
| 206 | Signal indicating abnormality input from the ECM (engine component malfunction) | ||
| 524 | Signal indicating abnormality input from the ECM (NE signal error) | ||
| 525 | Signal indicating abnormality input from the ECM (GI signal error) |