DTC P0340-886: Camshaft Position Sensor "A" Circuit: Description

The power management control ECU (HV CPU) compares the engine speed sent from the ECM via CAN communication and the engine speed that is indicated by pulses sent from the ECM. If the pulse input is not normal, the power management control ECU (HV CPU) sets this DTC.

DTC No.	INF Code	DTC Detection Condition	Trouble Area
P0340	886	Malfunction in the engine speed sensor (GI signal) circuit	Wire harness or connector No. 1 crank position sensor (Camshaft position sensor) Inverter with converter assembly ECM Power management control ECU