DTC B2450: Initialization has not been Performed: Procedure

1. Perform initialization of the headlight leveling ECU assembly. Refer to INITIALIZATION .

NEXT: Go to next step 

1. Using the Techstream, recheck for DTCs.

   Result

   Result	Proceed to
   DTC B2450 is not output.	A
   DTC B2450 is output.	B

   HINT: 

   If the headlight leveling ECU assembly stores DTC B2450 even though the ECU has been initialized, there may be a malfunction in the headlight leveling ECU assembly.

B → See step   3 

A → END