HEADUP Display: Disassembly: Disassembly

NOTE:

When disassembling the headup display, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

REMOVE COMBINATION METER MIRROR GLASS
1. Remove the 3 screws and combination meter mirror glass.
  
  Fig 1: Identifying Combination Meter Mirror Glass And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 1 COMBINATION METER MIRROR CASE
1. Remove the 2 screws.
  
  Fig 2: Identifying Combination Meter Mirror Case
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disengage the 3 claws to remove the No. 1 combination meter mirror case.
REMOVE COMBINATION METER MIRROR
1. Disconnect the connector.
  
  Fig 3: Identifying Combination Meter Mirror, Connector, And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 screws and combination meter mirror.
REMOVE NO. 1 COMBINATION METER MIRROR PLATE
1. Disengage the 2 claws and remove the No. 1 combination meter mirror plate as shown in the illustration.
  
  Fig 4: Removing No. 1 Combination Meter Mirror Plate
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 COMBINATION METER MIRROR
1. Remove the No. 2 combination meter mirror as shown in the illustration.
  
  Fig 5: Removing No. 2 Combination Meter Mirror
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 COMBINATION METER MIRROR PLATE
1. Remove the 4 screws.
  
  Fig 6: Identifying No. 2 Combination Meter Mirror Plate
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disengage the 2 guides to remove the No. 2 combination meter mirror plate.
REMOVE NO. 2 COMBINATION METER MIRROR WIRE
1. Disengage the 3 clamps.
  
  Fig 7: Identifying No. 2 Combination Meter Mirror Wire Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disengage the 2 guides as shown in the illustration.
  
  Fig 8: Identifying No. 2 Combination Meter Mirror Guides
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disconnect the connector to remove the No. 2 combination meter mirror wire.
  
  Fig 9: Identifying No. 2 Combination Meter Mirror Wire Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE COMBINATION METER MIRROR ECU
1. Disconnect the connector to remove the combination meter mirror ECU as shown in the illustration.
  
  Fig 10: Removing Combination Meter Mirror ECU
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE COMBINATION DISPLAY
1. Remove the 3 screws and combination display.
  
  Fig 11: Identifying Combination Display And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the connector and remove the No. 2 combination meter mirror wire from the combination display as shown in the illustration.
  
  Fig 12: Removing No. 2 Combination Meter Mirror Wire From Combination Display
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 COMBINATION METER MIRROR CASE