LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Matrix Base, Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display (Service Information) >> Clock >> Removal >> Removal

Meter / Gauge / Display (Service Information): Clock: Removal: Removal

  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  . Refer to REMOVAL - Step 8
  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)  . Refer to REMOVAL - Step 17
  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)  . Refer to REMOVAL - Step 18
  4. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle)  . Refer to REMOVAL - Step 19
  5. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle)  . Refer to REMOVAL - Step 20
  6. REMOVE AIR CONDITIONING PANEL ASSEMBLY  . Refer to REMOVAL - Step 6
  7. REMOVE CLOCK ASSEMBLY 
    1. Disengage the 2 claws and remove the clock assembly.
      Fig 1: View Of Clock Assembly And Claws
      GTY242035Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals