LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Highlander Limited, FWD >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tire And Wheel (Service Information) (Except Hybrid) >> Tire Pressure Warning Reset Switch >> Inspection >> Inspection

Tire Pressure Warning Reset Switch: Inspection: Inspection

  1. INSPECT TIRE PRESSURE WARNING RESET SWITCH 
    1. Remove the tire pressure warning reset switch.
      Fig 1: Identifying Tire Pressure Warning Reset Switch & Connector Terminals
      GTY178037Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Measure the resistance according to the value(s) in the table below.

      Standard resistance

      Tester Connection Switch Condition Specified Condition
      D32-1 - D32-2 ON Below 1 Ω
      OFF 10 kΩ or higher

      If the result is not as specified, replace the tire pressure warning reset switch.

scientia non olet · About LEMON Manuals