DTC P2601-779: Oil Pump Control Circuit Range / Performance: Description
WARNING: This page is about a different variant/trim than selected.
Refer to the description for DTC P2601-777. Refer to DESCRIPTION .
| DTC No. |
INF Code |
DTC Detection Condition |
Trouble Area |
| P2601 |
779 |
- Abnormal power source voltage is detected by the oil pump with motor assembly.
- Power source voltage input to the oil pump with motor assembly is 6.96 V or less for 2 seconds or more with the OIL PMP relay on.
|
- OIL PMP fuse
- Wire harness or connector
- Hybrid vehicle control ECU
- Oil pump with motor assembly
|