DTC P2532-772: Ignition Switch Run Position Circuit High: Description
WARNING: This page is about a different variant/trim than selected.
The hybrid vehicle control ECU monitors IGSW signals sent from the main body ECU and detects the following malfunction.
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P2532 | 772 | When IG1 information from the ECUs that are connected to terminal IG1 of the power source control ECU is interrupted, the power source voltage is still applied to terminal IGSW. |
|
HINT:
If DTC P2532-772 is stored, the vehicle will turn off.