DTC P1606-308: Collision Detection; DTC P1606-317: Collision Detection: Description
WARNING: This page is about a different variant/trim than selected.
The hybrid vehicle control ECU receives a signal that indicates a collision from the airbag sensor assembly to detect a collision. After detecting a collision, the hybrid vehicle control ECU shuts off the high voltage systems for safety.
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P1606 | 308 | Shutoff signal from the center airbag sensor assembly is determined. |
|
| P1606 | 317 | A collision is determined due to a wiring malfunction. |
|
HINT:
If P1606-308 or 317 is output, the vehicle cannot start unless the DTCs are cleared using the Techstream.