DTC P0A1C-706: Drive Motor "B" Control Module; DTC P0A1C-708: Drive Motor "B" Control Module; DTC P0A1C-710: Drive Motor "B" Control Module; DTC P0A1C-797: Drive Motor "B" Control Module: Description
WARNING: This page is about a different variant/trim than selected.
The MG ECU located in the inverter with converter assembly monitors its internal operation and it will set DTCs when it detects malfunctions. If any of the following DTCs are output, replace the inverter with converter assembly.
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P0A1C | 706 | A/D converter error | Inverter with converter assembly |
| 708 | CPU ROM-RAM error | ||
| 710 | ALU error | ||
| 797 | R/D converter communication error |