DTC P0A1B-168: Drive Motor "A" Control Module; DTC P0A1B-795: Drive Motor "A" Control Module; DTC P0A1B-796: Drive Motor "A" Control Module: Description

WARNING: This page is about a different variant/trim than selected.

The inverter with converter assembly (MG ECU) monitors its internal operation and detects malfunctions.

HINT:

The term "drive motor A" indicates MG2.

DTC No.	INF Code	DTC Detection Condition	Trouble Area
P0A1B	168	The difference between the resolver angle for control and the estimated resolver angle exceeds the allowable value.	Inverter with converter assembly Hybrid vehicle transaxle assembly Rear traction motor with transaxle assembly Wire harness or connector
	795	Resolver REF signal cycle error
	796	Resolver REF signal oscillation stop error