DTC P0A0F-204: Engine Failed to Start; DTC P0A0F-205: Engine Failed to Start; DTC P0A0F-206: Engine Failed to Start; DTC P0A0F-524: Engine Failed to Start; DTC P0A0F-525: Engine Failed to Start: Description
WARNING: This page is about a different variant/trim than selected.
If an engine malfunction occurs, an engine malfunction signal is sent from the ECM to the hybrid vehicle control ECU. When the hybrid vehicle control ECU receives this signal, it sets a DTC and performs fail-safe control.
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P0A0F | 204 | Signal indicating an abnormality is input from the ECM (abnormal engine output). |
|
| 205 | Signal indicating an abnormality is input from the ECM (engine is unable to start). | ||
| 206 | Signal indicating an abnormality is input from the ECM (engine component malfunction). | ||
| 524 | Signal indicating an abnormality is input from the ECM (NE signal error). | ||
| 525 | Signal indicating an abnormality is input from the ECM (GI signal error). |