LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Highlander Limited, FWD >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Drive Shaft (Service Information) (Except Hybrid) >> Rear Drive Shaft Assembly >> Inspection >> Inspection

Rear Drive Shaft Assembly: Inspection: Inspection

  1. INSPECT REAR DRIVE SHAFT ASSEMBLY 
    1. Check that there is no excessive play in the radial direction of the outboard joint.
      Fig 1: Checking Excessive Play In Outboard Joint And Inboard Joint
      GTY139127Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check that the inboard joint slides smoothly in the thrust direction.
    3. Check that there is no excessive play in the radial direction of the inboard joint.
    4. Check the boots for damage.
    5. Check whether the drive shaft dimension (A) is within the following specification.
      Fig 2: Identifying Drive Shaft Dimensions
      GTY177646Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Dimension (A)

      757.9 mm (2.49 ft.)

scientia non olet · About LEMON Manuals