Stereo Component Amplifier: Removal: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Manual Seat)
WARNING:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment. Refer to PRECAUTION .

NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
REMOVE FRONT SEAT HEADREST ASSEMBLY (for Manual Seat)
HINT:

Use the same procedure for the RH side and the LH side. Refer to REMOVAL - Step 2 .
REMOVE FRONT OUTER SEAT TRACK COVER (for Manual Seat)
HINT:

Use the same procedure for the RH side and the LH side. Refer to REMOVAL - Step 3 .
REMOVE FRONT INNER SEAT TRACK COVER (for Manual Seat)
HINT:

Use the same procedure for the RH side and the LH side. Refer to REMOVAL - Step 4 .
REMOVE REAR SEAT TRACK COVER (for Manual Seat)
HINT:

Use the same procedure for the RH side and the LH side. Refer to REMOVAL - Step 5 .
REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)
HINT:

Use the same procedure for the RH side and the LH side. Refer to REMOVAL - Step 6 .
REMOVE FRONT SEAT HEADREST ASSEMBLY (for Power Seat)
HINT:

Use the same procedure for the RH side and the LH side. Refer to REMOVAL - Step 1 .
REMOVE FRONT OUTER SEAT TRACK COVER (for Power Seat)
HINT:

Use the same procedure for the RH side and the LH side. Refer to REMOVAL - Step 2 .
REMOVE FRONT INNER SEAT TRACK COVER (for Power Seat)
HINT:

Use the same procedure for the RH side and the LH side. Refer to REMOVAL - Step 3 .
REMOVE REAR OUTER SEAT TRACK COVER (for Power Seat)
HINT:

Use the same procedure for the RH side and the LH side. Refer to REMOVAL - Step 4 .
REMOVE REAR INNER SEAT TRACK COVER (for Power Seat)
HINT:

Use the same procedure for the RH side and the LH side. Refer to REMOVAL - Step 5 .
REMOVE FRONT SEAT ASSEMBLY (for Power Seat)
HINT:

Use the same procedure for the RH side and the LH side. Refer to REMOVAL - Step 6 .
REMOVE AUDIO AMPLIFIER COVER
1. Remove the 3 clips and audio amplifier cover.
  
  Fig 1: Identifying Audio Amplifier Cover And Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY
1. Disconnect each connector.
  
  Fig 2: Locating Stereo Component Amplifier Assembly Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the nut and stereo component amplifier assembly as shown in the illustration.
  
  Fig 3: Locating Stereo Component Amplifier Assembly And Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002