DTC P0A80-123: Replace Hybrid Battery Pack: Procedure

WARNING: This page is about a different variant/trim than selected.

CHECK DTC OUTPUT (DTC P0AFC-123 IS OUTPUT) See step 1
B → See step 5

A: Go to next step
CHECK BATTERY SMART UNIT See step   2
B → See step   3

A → See step   4
REPLACE HV BATTERY ASSEMBLY. Refer to REMOVAL
REPLACE BATTERY SMART UNIT. Refer to REMOVAL
GO TO DTC P0AFC-123. Refer to DTC P0AFC-123: Hybrid Battery Pack Sensor Module