LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Highlander Hybrid >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belt (Service Information) (Hybrid) >> REAR NO. 1 SEAT INNER BELT ASSEMBLY (for LH Side) >> Removal >> Removal

REAR NO. 1 SEAT INNER BELT ASSEMBLY (for LH Side): Removal: Removal

  1. REMOVE REAR CENTER SEAT ASSEMBLY 
  2. REMOVE REAR SEAT HEADREST ASSEMBLY  . Refer to REMOVAL - Step 2
  3. REMOVE REAR SEAT TRACK BRACKET COVER  . Refer to REMOVAL - Step 3
  4. REMOVE REAR OUTER TRACK BRACKET COVER  . Refer to REMOVAL - Step 4
  5. REMOVE REAR INNER TRACK BRACKET COVER  . Refer to REMOVAL - Step 5
  6. REMOVE RECLINING HINGE COVER LH  . Refer to REMOVAL - Step 6
  7. REMOVE REAR SEAT LEG SIDE COVER  . Refer to REMOVAL - Step 7
  8. DISCONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY  . Refer to REMOVAL - Step 8
  9. REMOVE REAR NO. 1 SEAT ASSEMBLY  . Refer to REMOVAL - Step 9
  10. REMOVE REAR SEAT RECLINING UPPER COVER  . Refer to DISASSEMBLY - Step 1
  11. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE  . Refer to DISASSEMBLY - Step 2
  12. REMOVE REAR SEAT CUSHION MOULDING LH  . Refer to DISASSEMBLY - Step 3
  13. REMOVE SEAT ADJUSTER COVER CAP  . Refer to DISASSEMBLY - Step 4
  14. REMOVE REAR SEAT CUSHION MOULDING RH  . Refer to DISASSEMBLY - Step 5
  15. REMOVE REAR NO. 1 SEAT CUSHION COVER WITH PAD  . Refer to DISASSEMBLY - Step 17
  16. REMOVE SEAT TRACK UPPER RAIL COVER  . Refer to DISASSEMBLY - Step 24
  17. REMOVE REAR SEAT RECLINING INNER COVER  . Refer to DISASSEMBLY - Step 25
  18. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY 
    1. Remove the bolt and the rear No. 1 seat inner belt assembly.
      Fig 1: Locating Rear No. 1 Seat Inner Belt Assembly Bolt
      GTY198932Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals