DTC P0A78-565: Drive Motor "A" Inverter Performance: Procedure
- CHECK DTC OUTPUT (HV)
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
- Check if DTCs are output.
Result
Result Proceed to P0A78-565 is not output. A Any of the other DTCs are also output. B
B → See step 4
A: Go to next step
- CHECK CONNECTOR CONNECTION CONDITION (INVERTER WITH CONVERTER ASSEMBLY CONNECTOR). Refer to PROCEDURE - Step 4
NG → CONNECT SECURELY
OK → See step 3
- REPLACE INVERTER WITH CONVERTER ASSEMBLY. Refer to REMOVAL
- GO TO DTC CHART. Refer to DIAGNOSTIC TROUBLE CODE CHART