DTC B1499/99: Multiplex Communication Circuit: Procedure
- CHECK CAN COMMUNICATION SYSTEM
- Using the Techstream, check if the CAN communication system is functioning normally.
Result Proceed to CAN DTC is not output A CAN DTC is output (w/ Smart Key System) B CAN DTC is output (w/o Smart Key System) C
B → See step 2
C → See step 4
A → See step 3
- Using the Techstream, check if the CAN communication system is functioning normally.
- GO TO CAN COMMUNICATION SYSTEM. Refer to DIAGNOSIS SYSTEM
- USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING
- GO TO CAN COMMUNICATION SYSTEM. Refer to DIAGNOSIS SYSTEM