Air Inlet Control Servo Motor: Removal: Removal

WARNING: This page is about a different variant/trim than selected.

REMOVE AIR CONDITIONING UNIT
Refer to REMOVAL
REMOVE NO. 3 AIR DUCT SUB-ASSEMBLY See step 3
REMOVE BLOWER ASSEMBLY See step 3
REMOVE AIR INLET SERVO MOTOR SUB-ASSEMBLY
1. Remove the 3 screws and air inlet servo motor sub-assembly.
  
  Fig 1: Identifying Air Inlet Servo Motor Sub-Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002