LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Highlander Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 85 (Air Conditioning (Service Information) (Except Hybrid)) >> Air Conditioning Amplifier >> Removal >> Removal

Air Conditioning Amplifier: Removal: Removal

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE FRONT DOOR SCUFF PLATE RH  . Refer to REMOVAL - Step 25
  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH  . Refer to REMOVAL - Step 26
  3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  . Refer to REMOVAL - Step 25
  4. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY  . Refer to REMOVAL - Step 26
  5. REMOVE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (w/ Smart Key System)  . Refer to REMOVAL - Step 5
  6. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY 
    1. Disconnect each connector.
      Fig 1: Identifying Air Conditioning Amplifier Assembly Screws
      GTY180381Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws and the air conditioning amplifier assembly.
scientia non olet · About LEMON Manuals