LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Highlander Hybrid >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System (Service Information) (Hybrid) >> Power Switch >> Installation >> Installation

Power Switch: Installation: Installation

  1. INSTALL POWER SWITCH 
    1. Engage the 2 claws to install the switch.
    2. Connect the switch connector.
  2. INSTALL FRONT NO. 1 CONSOLE BOX INSERT  . Refer to INSTALLATION - Step 16
  3. INSTALL CONSOLE BOX ASSEMBLY  . Refer to INSTALLATION - Step 1
  4. INSTALL LOWER REAR CONSOLE BOX  . Refer to INSTALLATION - Step 2
  5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 19
  6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 24
  7. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH  . Refer to INSTALLATION - Step 89
  8. INSTALL FRONT DOOR SCUFF PLATE LH  . Refer to INSTALLATION - Step 90
  9. INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY (for Manual Air Conditioning System)  . Refer to INSTALLATION - Step 1
  10. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)  . Refer to INSTALLATION - Step 1
  11. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY  . Refer to INSTALLATION - Step 31
scientia non olet · About LEMON Manuals