Rear Bumper: Reassembly: Reassembly

INSTALL NO. 2 REAR BUMPER SIDE SUPPORT LH
1. Engage the 3 claws to install the No. 2 rear bumper side support LH.
  
  Fig 1: Identifying No. 2 Rear Bumper Side Support LH & Fasteners
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the 2 screws.
  Torque: 3.0 N*m (31 kgf*cm, 27 in.*lbf)
INSTALL NO. 2 REAR BUMPER SIDE SUPPORT RH
HINT:

Use the same procedure described for the LH side.
INSTALL REAR BUMPER SIDE RETAINER LH
1. Engage the 2 claws to install the rear bumper side retainer LH.
  
  Fig 2: Identifying Rear Bumper Side Retainer LH & Fasteners
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the screw.
  Torque: 3.0 N*m (31 kgf*cm, 27 in.*lbf)
INSTALL REAR BUMPER SIDE RETAINER RH
HINT:

Use the same procedure described for the LH side.
INSTALL REAR BUMPER NO. 1 REINFORCEMENT
1. Install the rear bumper No. 1 reinforcement with the 6 nuts.
  
  Fig 3: Identifying Rear Bumper Reinforcement Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 64 N*m (653 kgf*cm, 47 ft.*lbf)
INSTALL REAR BUMPER ENERGY ABSORBER
1. Engage the 2 guides to install the rear bumper energy absorber.
  
  Fig 4: Identifying Rear Bumper Energy Absorber & Fasteners
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR BUMPER MOULDING
1. Engage the 7 claws to install the rear bumper moulding.
  
  Fig 5: Identifying Rear Bumper Moulding Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 2 claws to install the 2 outside moulding retainers.
  
  Fig 6: Identifying Rear Bumper Moulding Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LOWER REAR BUMPER COVER
1. Engage the 8 claws to install the lower rear bumper cover.
  
  Fig 7: Identifying Lower Rear Bumper Cover Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 2 claws to install the 2 outside moulding retainers.
  
  Fig 8: Engaging Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REFLEX REFLECTOR ASSEMBLY LH
1. Engage the 2 claws and 2 guides to install the reflex reflector assembly LH.
  
  Fig 9: Identifying Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the screw.
  
  Fig 10: Identifying Reflex Reflector Assembly LH & Fasteners
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REFLEX REFLECTOR ASSEMBLY RH
HINT:

Use the same procedure described for the LH side.