DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0129: Lost Communication with Skid Control ECU; DTC U0131: Lost Communication with Power Steering Control Module; DTC U0142: Lost Communication with Main Body ECU; DTC U0151: Lost Communication with Airbag ECU: Procedure
- CHECK CAN COMMUNICATION SYSTEM
- Check if a CAN communication DTC is output. Refer to DIAGNOSIS SYSTEM
.
Result
Result Proceed to DTC is output. A DTC is not output. B HINT:
If CAN communication system DTC U0100, U0129, U0131, U0142, or U0151 and another DTC are output at the same time, perform troubleshooting for CAN communication system DTC U0100, U0129, U0131, U0142, or U0151 first.
B → See step 2
A → See step 3
- Check if a CAN communication DTC is output. Refer to DIAGNOSIS SYSTEM
.
- USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING .
- GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING .