LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Camry LE >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Sliding Roof (Diagnostic Codes & Symptom Tests) (Except Hybrid) >> Sliding Roof System >> Symptom Tests >> Sliding Roof does not Move by Operating Sliding Roof Control Switch >> Inspection Procedure

Inspection Procedure

NOTE:
  • Inspect the fuses for circuits related to this system before performing the following inspection procedure.
  • When the sliding roof ECU (sliding roof drive gear sub-assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear sub-assembly) must be initialized. Refer to INITIALIZATION .
  • The sliding roof system uses the LIN communication system. First, confirm that there are no malfunctions in the LIN communication system. Refer to the How to Proceed with Troubleshooting procedure. Refer to HOW TO PROCEED WITH TROUBLESHOOTING .
  • When a sliding roof ECU (sliding roof drive gear sub-assembly) DTC is output, first perform troubleshooting for the sliding roof ECU (sliding roof drive gear sub-assembly) DTC.
scientia non olet · About LEMON Manuals