Remote Control System does not Operate: Procedure

1. Check the key-linked and wireless transmitter-linked function*1. Refer to OPERATION CHECK .
   • *1: w/ Daytime Running Light Control

   Result

   Result	Proceed to
   The roof glass does not operate by the key-linked or wireless transmitter-linked*1 function, but the window glass operate.	A
   Both the window glass and roof glass do not operate by the key-linked or wireless transmitter-linked*1 function.	B
   Both the window glass and roof glass operate by the key-linked and wireless transmitter-linked*1 function.	C

   • *1: w/ Daytime Running Light Control

B → See step   7 

C → See step   6 

A: Go to next step 

1. Check the sliding roof operation. Refer to OPERATION CHECK .

   OK

   Sliding roof operation operates normally.

NG → See step   8 

OK: Go to next step 

1. Replace the sliding roof ECU (sliding roof drive gear sub-assembly). Refer to REMOVAL .

NEXT: Go to next step 

1. Initialize the sliding roof ECU (sliding roof drive gear sub-assembly). Refer to INITIALIZATION .

NEXT: Go to next step 

1. Check the key-linked and wireless transmitter-linked*1 function. Refer to OPERATION CHECK .

   OK

   The key-linked and wireless transmitter-linked*1 function operates normally.

   • *1: w/ Daytime Running Light Control

NG → See step   9 

OK → END (SLIDING ROOF ECU WAS DEFECTIVE)