LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Camry LE >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Sliding Roof (Diagnostic Codes & Symptom Tests) (Except Hybrid) >> Sliding Roof System >> Symptom Tests >> Remote Control System does not Operate >> Inspection Procedure

Inspection Procedure

NOTE:
  • The sliding roof key-linked function and sliding roof wireless transmitter-linked function*1 can be customized. Make sure that both functions are ON. Refer to CUSTOMIZE PARAMETERS .

    *1: w/ Daytime Running Light Control

  • When the sliding roof ECU (sliding roof drive gear sub-assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear sub-assembly) must be initialized. Refer to INITIALIZATION .
  • Since the sliding roof system has functions that use LIN communication, first confirm that there is no malfunction in the LIN communication system with the How to Proceed with Troubleshooting procedure. Refer to HOW TO PROCEED WITH TROUBLESHOOTING .
  • When sliding roof ECU (sliding roof drive gear sub-assembly) DTC is output, first perform troubleshooting for the sliding roof ECU (sliding roof drive gear sub-assembly) DTC.
scientia non olet · About LEMON Manuals