LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Camry LE >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System (Exterior) (Service Information) (Except Hybrid) >> Rear Light Assembly >> Disassembly >> Disassembly

Rear Light Assembly: Disassembly: Disassembly

  1. REMOVE REAR LIGHT GASKET 
    1. Remove the rear light gasket.
      Fig 1: Identifying Rear Light Gasket
      GTY321616Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:
      • Be sure to remove all the traces of the old gasket from the body.
      • Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.
  2. REMOVE BACK-UP LIGHT BULB 
    1. Turn the back-up light socket with the back-up light bulb in the direction indicated by the arrow shown in the illustration and remove them as a unit.
      Fig 2: Removing Back-Up Light Bulb
      GTY323159Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the back-up light bulb from the back-up light socket.
scientia non olet · About LEMON Manuals