LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Camry L >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tire Pressure Warning System (Diagnostic Codes & Circuit Tests) (Except Hybrid) >> Tire Pressure Warning System >> DTC C2126/26: Transmitter ID not Received in Main Mode >> Description

DTC C2126/26: Transmitter ID not Received in Main Mode: Description

After all IDs are registered, DTC C2126/26 is set in the tire pressure warning ECU and receiver and the tire pressure warning light blinks for 1 minute and then illuminates.

When the tire pressure warning ECU and receiver successfully receives radio waves from all the transmitters whose IDs are stored in the ECU, DTC C2126/26 is cleared and the tire pressure warning light goes off.

DTC No. DTC Detection Condition Trouble Area
C2126/26 After ID registration is completed, ECU does not receive radio waves from transmitters whose IDs are stored in ECU.
  • ID registration failure
  • Tire pressure warning valve and transmitter
  • Tire pressure warning ECU and receiver

HINT: 

The purpose of this DTC is to help prevent delivering a vehicle that has incorrectly registered IDs. After all IDs are registered, DTC C2126/26 is detected and the tire pressure warning light blinks for 1 minute and then illuminates. If the tire pressure warning light does not turn off after a little while, IDs may be incorrectly registered.