LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Camry Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Panels / Trim (Service Information) (Except Hybrid) >> Rear Wheel House Plate >> Removal >> Removal

Rear Wheel House Plate: Removal: Removal

  1. REMOVE FRONT ROCKER PANEL MOULDING END COVER 
    1. Remove the 2 screws and front rocker panel moulding end cover.
      Fig 1: Identifying Front Rocker Panel Molding End Cover Screws
      GTY316286Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals