LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2012 >> Camry Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Panels / Trim (Service Information) (Except Hybrid) >> Front Bumper >> Disassembly >> Disassembly

Front Bumper: Disassembly: Disassembly

  1. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)  . Refer to REMOVAL - Step 2 .
  2. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)  . Refer to REMOVAL - Step 3 .
  3. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)  . Refer to REMOVAL - Step 2 .
  4. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light) 

    HINT: 

    Use the same procedure as for the LH side.

  5. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET (for Standard) 
    1. w/o Side Turn Signal Light:
      1. Remove the 2 screws.
        Fig 1: Identifying Front Bumper Extension Mounting Bracket (For Standard) w/o Side Turn Signal Light
        GTY315970Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        TEXT IN ILLUSTRATION

        *1 Hook
      2. Disengage the 2 hooks and remove the front bumper extension mounting bracket.
    2. w/ Side Turn Signal Light:
      1. Remove the 2 screws.
        Fig 2: Identifying Front Bumper Extension Mounting Bracket (For Standard) w/ Side Turn Signal Light
        GTY320897Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        TEXT IN ILLUSTRATION

        *1 Hook
      2. Disengage the 2 hooks and remove the front bumper extension mounting bracket.
  6. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET (for Sport Package) 
    1. Remove the 2 screws.
      Fig 3: Identifying Front Bumper Extension Mounting Bracket (For Sport Package)
      GTY315730Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *1 Hook
    2. Disengage the 2 hooks and remove the front bumper extension mounting bracket.
  7. REMOVE FRONT FENDER LINER RETAINER 
    1. Disengage the claw and remove the front fender liner retainer.
      Fig 4: Identifying Front Fender Liner Retainer
      GTY319053Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      Use the same procedure for the RH side and LH side.

  8. REMOVE FRONT BUMPER HOLE COVER LH (for Standard) 
    1. Disengage the 5 claws and remove the front bumper hole cover LH.
      Fig 5: Identifying Front Bumper Hole Cover LH (For Standard) Fasteners
      GTY319068Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. w/ Fog Light:
      1. Disengage the 2 claws and 2 guides, and remove the fog light mounting bracket LH.
        Fig 6: Identifying Front Bumper Hole Cover LH (For Standard) Claws w/ Fog Light
        GTY318414Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE FRONT BUMPER HOLE COVER RH (for Standard) 

    HINT: 

    Use the same procedure as for the LH side.

  10. REMOVE FRONT BUMPER HOLE COVER LH (for Sport Package) 
    1. Remove the 2 screws.
      Fig 7: Identifying Front Bumper Hole Cover LH (For Sport Package) Fasteners
      GTY314772Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 7 claws and remove the front bumper hole cover LH.
    3. Remove the 2 screws.
      Fig 8: Identifying Front Bumper Hole Cover LH (For Sport Package) Fasteners
      GTY315010Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the 2 claws and remove the front bumper side moulding LH.
    5. Disengage the 3 claws and guide to remove the fog light mounting bracket LH.
      Fig 9: Identifying Fog Light Mounting Bracket LH (For Sport Package) Claws
      GTY315322Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE FRONT BUMPER HOLE COVER RH (for Sport Package) 

    HINT: 

    Use the same procedure as for the LH side.

  12. REMOVE NO. 1 LOWER RADIATOR GRILLE 
    1. for Standard:
      1. Disengage the 16 claws and 2 guides, and remove the No. 1 lower radiator grille.
        Fig 10: Identifying No. 1 Lower Radiator Grille Claws And Guides (For Standard)
        GTY318905Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. for Sport Package:
      1. Disengage the 6 claws and 2 guides, and remove the No. 1 lower radiator grille.
        Fig 11: Identifying No. 1 Lower Radiator Grille Claws And Guides (For Sport Package)
        GTY315146Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. REMOVE FRONT BUMPER ENERGY ABSORBER 
    1. Disengage the 2 guides and remove the front bumper energy absorber.
      Fig 12: Identifying Front Bumper Energy Absorber Guides
      GTY323158Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY 
    1. Disengage the 5 clamps.
      Fig 13: Identifying Front Bumper Reinforcement Sub-Assembly Fasteners
      GTY319263Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 6 bolts and front bumper reinforcement sub-assembly.
  15. REMOVE FRONT BUMPER SIDE RETAINER LH 
    1. Remove the bolt.
      Fig 14: Identifying Front Bumper Side Retainer LH Fasteners
      GTY322856Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the claw and remove the front bumper side retainer LH.
  16. REMOVE FRONT BUMPER SIDE RETAINER RH 

    HINT: 

    Use the same procedure as for the LH side.

scientia non olet · About LEMON Manuals